Product description:

The device is an EoC terminal to convert UTP cable to 75 ohm coaxial cable and vice versa. Moreover, it allows terrestrial or cable TV signals to be combined into the coaxial cable. It is therefore suitable for use where wiring by 75 ohm coaxial cable is already prepared and the user requests to extend it with data transmission (Ethernet).
No settings are required, just connect the device according to the picture below. For the external power, use our original power adapter 9-12V DC.
The NT12 terminal works in connection with any Ethernet devices according to 100BASE-TX and 10BASE-T standard.
When two NT12 terminals are connected together using a coaxial cable, the coaxial cable should not be interrupted by any cable connector or other device. If this can not be avoided and it is necessary to use a cable connector, use only quality connectors for coaxial cables with an impedance of 75 ohm.

Related downloads:
Get the pricelist


Brief specification:

Parameter Condition Value
Frequency range TV 470-862 MHz
Insertion loss TV 2 dB avg
Data RJ45 port 100 Mbit/s
Coaxial input 100 Mbit/s
Power consumption LAN active 50 mA / 12V
Dimensions (w,d,h) 5.4 x 6.0 x 3.2 cm
Temperature range -25 ~ +60 °C

Examples of utilization: